Research and Development of a Technological Process and Stamping Equipment for Radial Extrusion of the “Picabur Body” Part

Fatkhulla Abdullaev, Shakhrukh Akhmadaliyev, Kamoliddin Khasanov, Rufat Abdullaev

2024

Abstract

The article talks about the production of the “Picabur Body” part using resource-saving extrusion stamping technology. The energy method and the finite element method were chosen as the research method. A kinematic version of the methods of radial extrusion with contour upsetting and a design diagram of the radial extrusion process are given. The deformation center and stress-strain state during extrusion stamping of the above part are determined. The mechanism and sequence of filling the working cavity of the die are revealed. The scheme of the die and its main working elements during extrusion stamping of the Pickabur Body are also given. The principle of operation of die tooling and technological equipment, which was used in radial extrusion stamping, is described.

Paper Citation

in Harvard Style

Abdullaev F., Akhmadaliyev S., Khasanov K. and Abdullaev R. (2024). Research and Development of a Technological Process and Stamping Equipment for Radial Extrusion of the “Picabur Body” Part. In Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT; ISBN 978-989-758-773-3, SciTePress, pages 294-300. DOI: 10.5220/0014262600004738

in Bibtex Style

@conference{i-craft24,
author={Fatkhulla Abdullaev and Shakhrukh Akhmadaliyev and Kamoliddin Khasanov and Rufat Abdullaev},
title={Research and Development of a Technological Process and Stamping Equipment for Radial Extrusion of the “Picabur Body” Part},
booktitle={Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT},
year={2024},
pages={294-300},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0014262600004738},
isbn={978-989-758-773-3},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT
TI - Research and Development of a Technological Process and Stamping Equipment for Radial Extrusion of the “Picabur Body” Part
SN - 978-989-758-773-3
AU - Abdullaev F.
AU - Akhmadaliyev S.
AU - Khasanov K.
AU - Abdullaev R.
PY - 2024
SP - 294
EP - 300
DO - 10.5220/0014262600004738
PB - SciTePress