The Influence of Suspension Plough Support Wheel Diameter and Width on Its Performance Indicators

Abdusalim Tukhtakuziev, Abdurakhmon Rasuljonov, Sherzod Barlibaev, Dilfuza Karimova, Madina Turdiyeva

2024

Abstract

The article presents the results of theoretical and experimental studies conducted on the study of the influence of the diameter and width of the support wheel of the suspension plough on the driving depth and its stability, and on the basis of this, to determine their optimal values. In theoretical studies, it was noted that the stability of the driving depth at the level of requirements is mainly ensured by the correct choice of the diameter of the plough support wheel and the width of it, and for a three-body suspension plug, their value is not less than 35 and 16 cm, respectively. In order to verify these obtained results, we prepared a three-body suspension plough and conducted experimental studies using it. For conducting experimental studies, the base wheels with the diameter and the width of the beam at 5 cm intervals from 30 cm to 50 cm and from 10 cm to 30 cm, respectively, were prepared. In experimental studies, the influence of the diameter of the plough support wheel and the width of its furrow, the driving depth, its mean square deviation, the vertical pressure force exerted by the support wheel on the soil, and the plow's traction resistance were studied. In order to reduce the influence of various variable factors on the obtained results, the experiments were carried out on specially prepared agro-funds, that is, they were first plowed, then leveled and fully irrigated. Based on the results of experimental studies, the following can be noted: in order for the plough to work stably at the specified depth, the diameter of the support wheel should be at least 40 cm, and the width of the rim should be at least 20 cm. These results fully correspond to the results of theoretical studies.

Paper Citation

in Harvard Style

Tukhtakuziev A., Rasuljonov A., Barlibaev S., Karimova D. and Turdiyeva M. (2024). The Influence of Suspension Plough Support Wheel Diameter and Width on Its Performance Indicators. In Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT; ISBN 978-989-758-773-3, SciTePress, pages 116-122. DOI: 10.5220/0014072700004738

in Bibtex Style

@conference{i-craft24,
author={Abdusalim Tukhtakuziev and Abdurakhmon Rasuljonov and Sherzod Barlibaev and Dilfuza Karimova and Madina Turdiyeva},
title={The Influence of Suspension Plough Support Wheel Diameter and Width on Its Performance Indicators},
booktitle={Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT},
year={2024},
pages={116-122},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0014072700004738},
isbn={978-989-758-773-3},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT
TI - The Influence of Suspension Plough Support Wheel Diameter and Width on Its Performance Indicators
SN - 978-989-758-773-3
AU - Tukhtakuziev A.
AU - Rasuljonov A.
AU - Barlibaev S.
AU - Karimova D.
AU - Turdiyeva M.
PY - 2024
SP - 116
EP - 122
DO - 10.5220/0014072700004738
PB - SciTePress