Calculation of the Amount of Grain Moving Inside the Grinding Chamber

Farmon Mamatov, Fakhridin Karshiev, Bogdagul Karshieva, Abdisalim Kenjabayev, Yigitali Shamayev, Alim Axmedov

2024

Abstract

In the world, resource-saving technologies for grinding grain feed and preparing full-value feed from it and technical means for their implementation are being produced. In particular, special attention is paid to high-quality grinding, energy and resource-saving devices by bringing grain feedstuffs such as wheat, barley, corn grain and soot to the same granulometric composition. From this point of view, in this research work, it is important to process cereal feed by mechanical grinding method, to develop devices that implement it, to justify their technological work process and parameters of working parts. The purpose of the research is to develop devices that grind grain feed at the level of the specified requirements at low costs and justify their parameters. Based on this, the amount of grain moving in the "air-particle ring" in the grinding chamber was calculated, and the amount of grain particles moving in the "air-particle ring" was calculated to be msl=0.025 kg. When the hammer of the hammer mill is working, the amount of fractions up to 1 mm in the crushed grains is 3%, the amount of fractions up to 1-2 mm is 87.6%, and the amount of fractions larger than 2 mm is 9.4%.

Paper Citation

in Harvard Style

Mamatov F., Karshiev F., Karshieva B., Kenjabayev A., Shamayev Y. and Axmedov A. (2024). Calculation of the Amount of Grain Moving Inside the Grinding Chamber. In Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT; ISBN 978-989-758-773-3, SciTePress, pages 27-30. DOI: 10.5220/0014042700004738

in Bibtex Style

@conference{i-craft24,
author={Farmon Mamatov and Fakhridin Karshiev and Bogdagul Karshieva and Abdisalim Kenjabayev and Yigitali Shamayev and Alim Axmedov},
title={Calculation of the Amount of Grain Moving Inside the Grinding Chamber},
booktitle={Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT},
year={2024},
pages={27-30},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0014042700004738},
isbn={978-989-758-773-3},
}

in EndNote Style

TY - CONF

JO - Proceedings of the 4th International Conference on Research of Agricultural and Food Technologies - Volume 1: I-CRAFT
TI - Calculation of the Amount of Grain Moving Inside the Grinding Chamber
SN - 978-989-758-773-3
AU - Mamatov F.
AU - Karshiev F.
AU - Karshieva B.
AU - Kenjabayev A.
AU - Shamayev Y.
AU - Axmedov A.
PY - 2024
SP - 27
EP - 30
DO - 10.5220/0014042700004738
PB - SciTePress