Banana Flakes: Design of Controlling Molding Machine based on Proximity Sensors

Seri Kuala, Eko Kuncoro Pramono, Galih Basuki, Agustami Sitorus

2019

Abstract

Banana flakes can be an alternative of nutrient-rich breakfast. It had been developed by PPTTG LIPI since 2016 and was carried out on a laboratory scale production. The scaling up was constrained at the cutting stage. The sticky properties of the dough required a 2-stages roasting treatment before become flakes. The cutting process manually on the dough that was flattened on a special grill paper. In this study, a control was developed using a Programmable Logic Control (PLC). The banana flakes molding machine consists of three main parts, the oil spray, the dough molding part, and the cutting part. Each part had a proximity sensor as a detector the presence of baking sheets which became inputs for the PLC. The sensor on the spraying part will control the electric pump oil. And the sensor on the molding part of the dough and the cutter will control the solenoid valve. Solenoid valve will transmits pneumatic power from the compressor to drive the dough molding and cutting. A simulation using CX programmer software to ensure the rate of the spraying part and the cutting part meet the rate of the dough molding.

Download


Paper Citation


in Harvard Style

Kuala S., Kuncoro Pramono E., Basuki G. and Sitorus A. (2019). Banana Flakes: Design of Controlling Molding Machine based on Proximity Sensors. In Proceedings of the 16th ASEAN Food Conference - Volume 1: 16th AFC, ISBN 978-989-758-467-1, pages 273-278. DOI: 10.5220/0009980400002964


in Bibtex Style

@conference{16th afc19,
author={Seri Kuala and Eko Kuncoro Pramono and Galih Basuki and Agustami Sitorus},
title={Banana Flakes: Design of Controlling Molding Machine based on Proximity Sensors},
booktitle={Proceedings of the 16th ASEAN Food Conference - Volume 1: 16th AFC,},
year={2019},
pages={273-278},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0009980400002964},
isbn={978-989-758-467-1},
}


in EndNote Style

TY - CONF

JO - Proceedings of the 16th ASEAN Food Conference - Volume 1: 16th AFC,
TI - Banana Flakes: Design of Controlling Molding Machine based on Proximity Sensors
SN - 978-989-758-467-1
AU - Kuala S.
AU - Kuncoro Pramono E.
AU - Basuki G.
AU - Sitorus A.
PY - 2019
SP - 273
EP - 278
DO - 10.5220/0009980400002964