Design and Implementation Buck-boost Converter using Arduino Mega 2560

Andhika Giyantara Giyantara, David Christover, Yun Tonce Kusuma Priyanto

2019

Abstract

Nowadays, the development of technology cannot be separated from energy demands. An increasing energy requirement needed power electronic circuits to support systems that are producing a direct voltage or commonly called Direct Current (DC). A problem obtained is to convert the desired voltage level according to desired requirements. The development of power electronic circuits can be solving these problems by using a DC-DC converter topology. In general, DC-DC converters have several topologies such as buck converter, boost converter, buck-boost converter, and Cuk converter. In this research, an inverting buck-boost converter topology is designed and implemented to increasing and decreasing voltage. The aim of this research is converting the input DC voltage value to the constant output DC voltage value. A value of duty cycle configuration is depending switch on and switch off from MOSFET, which generated from Arduino Mega 2560. The results of the average output voltage value from the mathematical condition is 12 Volt; after that, from simulation condition is 12,05 Volt and then from implementation condition is 9,92 Volt. The results of the average ripple output voltage from the mathematical condition are 0,4%, after that from the simulation is 0,79% and then from implementation condition is 0,56%. The results of the average ripple value current from the mathematical condition are 6.54% and then from simulation condition is 6.94%. Finally, the buck-boost converter system that has been designed from this research has obtained an average value of power efficiency in the simulation conditions is 65.12% and then from implementation condition is 74,87%.

Download


Paper Citation


in Harvard Style

Giyantara A., Christover D. and Priyanto Y. (2019). Design and Implementation Buck-boost Converter using Arduino Mega 2560.In Proceedings of the 1st International Conference on Industrial Technology - Volume 1: ICONIT, ISBN 978-989-758-434-3, pages 169-176. DOI: 10.5220/0009443301690176


in Bibtex Style

@conference{iconit19,
author={Andhika Giyantara Giyantara and David Christover and Yun Tonce Kusuma Priyanto},
title={Design and Implementation Buck-boost Converter using Arduino Mega 2560},
booktitle={Proceedings of the 1st International Conference on Industrial Technology - Volume 1: ICONIT,},
year={2019},
pages={169-176},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0009443301690176},
isbn={978-989-758-434-3},
}


in EndNote Style

TY - CONF

JO - Proceedings of the 1st International Conference on Industrial Technology - Volume 1: ICONIT,
TI - Design and Implementation Buck-boost Converter using Arduino Mega 2560
SN - 978-989-758-434-3
AU - Giyantara A.
AU - Christover D.
AU - Priyanto Y.
PY - 2019
SP - 169
EP - 176
DO - 10.5220/0009443301690176