Evaluation of the Imaging Properties of a CT Scanner with the Adaptive Statistical Iterative Reconstruction Algorithm - Noise, Contrast and Spatial Resolution Properties of CT Images Reconstructed at Different Blending Levels

Patrizio Barca, Marco Giannelli, Maria Evelina Fantacci, Davide Caramella

2017

Abstract

X-ray Computed Tomography (CT) is an essential imaging technique for different diagnostic and therapeutic tasks. However, ionizing radiation from CT scanners represents the largest source of medical exposure for the population of industrialized countries. In order to reduce CT dose during patient examination, iterative reconstruction algorithms have been developed to help existing dose reduction methods. In this paper, we studied the image quality performance of a 64-slice CT scanner (Optima CT660, GE Healthcare, Waukesha, WI, USA) that implements both the conventional filtered back-projection (FBP) and the Adaptive Statistical Iterative Reconstruction (ASIR, GE Healthcare, Waukesha, WI, USA) algorithm. In order to compare the performance of these two reconstruction technologies, CT images of the Catphan®504 phantom were reconstructed using both conventional FBP and ASIR with different percentages of reconstruction from 20% to 100%. Noise level, noise power spectrum (NPS), contrast-to-noise ratio (CNR) and modulation transfer function (MTF) were estimated for different values of the main radiation exposure parameters (i.e. mAs, kVp, pitch and slice thickness) and contrast objects. We found that, as compared to conventional FBP, noise/CNR decreases/increases non-linearly up to 50%/100% when increasing the ASIR blending level of reconstruction. Furthermore, ASIR modifies the NPS curve shape (i.e. the noise texture). The MTF for ASIR-reconstructed images depended on both tube load and contrast level, whereas MTF of FBP-reconstructed images did not. For lower tube load and contrast level, ASIR offered lower performance as compared to conventional FBP in terms of reduced spatial resolution and MTF decreased with increasing ASIR blending level of reconstruction.

References

  1. McNitt-Gray M. F., 2002. AAPM/RSNA Physics tutorial for residents: Topics in CT. Radiation dose in CT. Radiographics; 22(6):1541-53.
  2. Willemink M. J., de Jong P. A., Leiner T., de Heer L. M., Nievelstein RA, Budde R. P., Schilham AM., 2013. Iterative reconstruction techniques for computed tomography Part 1: Technical principles. European Radiology; 23:1623-31.
  3. Beister M., Kolditz D., Kalender W. A., 2012. Iterative reconstruction methods in X-ray CT. Physica Medica; 28(2):94-108.
  4. Richard S., Husarik D. B., Yadava G., Murphy S. N., Samei E., 2012. Towards task-based assessment of CT performance: system and object MTF across different reconstruction algorithms. Medical Physics; 39(7): 4115-22.
  5. Samei E. and Richard S. Assessment of the dose reduction potential of a model-based iterative reconstruction algorithm using a task-based performance metrology. Medical Physics 2015; 42(1):314-23.
  6. Miéville F. A., Gudinchet F., Brunelle F., Bochud F. O., Verdun F. R., 2013. Iterative reconstruction methods in two different MDCT scanners: Physical metrics and 4-alternative forced-choice detectability experiments - A phantom approach. Physica Medica; 2:99-110.
  7. Siewerdsen J. H., Cunningham I. A., Jaffray D. A., 2002. A framework for noise-power spectrum analysis of multidimensional images. Medical Physics; 29(11):2655-71.
  8. Verdun F. R., Racine D., Ott J. G., Tapiovaara M. J., Toroi P., Bochud F. O., Veldkamp W. J., Schegerer A., Bouwman R. W., Giron I. H., Marshall N. W., Edyvean S., 2015. Image quality in CT: From physical measurements to model observers. Physica Medica; 31(8):823-43.
  9. Friedman S. N., Fung G. S. K., Siewerdsen J. H., Tsui B. M. W., 2013. A simple approach to measure computed tomography (CT) modulation transfer function (MTF) and noise-power spectrum (NPS) using the American College of Radiology (ACR) accreditation phantom. Medical Physics; 40(5):051907.
  10. Takenaga T, Katsuragawa S, Goto M, Hatemura M, Uchiyama Y, Shiraishi J., 2015. Modulation transfer function measurement of CT images by use of a circular edge method with a logistic curve-fitting technique. Radiological Physics and Technology; 8:53-59.
  11. Smith E. A., Dillman J. R., Goodsitt M. M., Christodoulou E. G., Keshavarzi N., Strouse P. J., 2014. Model-based iterative reconstruction: Effect on patient radiation dose and image quality in pediatric body CT. Radiology; 270(2):526-34.
  12. Brady S. L., Yee B. S., Kaufman R. A., 2012. Characterization of adaptive statistical iterative reconstruction algorithm for dose reduction in CT: A pediatric oncology perspective. Medical Physics; 39(9):5520-31.
  13. McCollough C. H., Yu L., Kofler J. M., Leng S., Zhang Y., Li Z., Carter R. E., 2015. Degradation of CT lowcontrast spatial resolution due to the use of iterative reconstruction and reduced dose levels. Radiology; 276(2):499-506.
  14. Yanagawa M., Honda O., Yoshida S., Kikuyama A., Inoue A., Sumikawa H., Koyama M., Tomiyama N., 2010. Adaptive statistical iterative reconstruction technique for pulmonary CT: image quality of the cadaveric lung on standard- and reduced-dose CT. Academic Radiology; 17(10):1259-66.
  15. Lim H., Chung M. J., Shin K. E., Hwang H. S., Lee K. S., 2016. The impact of Iterative Reconstruction in LowDose Computed Tomography on the Evaluation of Diffuse Interstitial Lung Disease. Korean Journal of Radiology; 17(6):950-60.
  16. Precht H., Kitslaar P. H., Broersen A., Dijkstra J., Gerke O., Thygesen J, Egstrup K, Lambrechtsen J., 2016. Influence of Adaptive Statistical Iterative Reconstruction on coronary plaque analysis in coronary computed tomography angiography. Journal of Cardiovascular Computed Tomography; 10(6):507-16.
Download


Paper Citation


in Harvard Style

Barca P., Giannelli M., Fantacci M. and Caramella D. (2017). Evaluation of the Imaging Properties of a CT Scanner with the Adaptive Statistical Iterative Reconstruction Algorithm - Noise, Contrast and Spatial Resolution Properties of CT Images Reconstructed at Different Blending Levels . In Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 1: BIODEVICES, (BIOSTEC 2017) ISBN 978-989-758-216-5, pages 200-206. DOI: 10.5220/0006240802000206


in Bibtex Style

@conference{biodevices17,
author={Patrizio Barca and Marco Giannelli and Maria Evelina Fantacci and Davide Caramella},
title={Evaluation of the Imaging Properties of a CT Scanner with the Adaptive Statistical Iterative Reconstruction Algorithm - Noise, Contrast and Spatial Resolution Properties of CT Images Reconstructed at Different Blending Levels},
booktitle={Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 1: BIODEVICES, (BIOSTEC 2017)},
year={2017},
pages={200-206},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0006240802000206},
isbn={978-989-758-216-5},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 10th International Joint Conference on Biomedical Engineering Systems and Technologies - Volume 1: BIODEVICES, (BIOSTEC 2017)
TI - Evaluation of the Imaging Properties of a CT Scanner with the Adaptive Statistical Iterative Reconstruction Algorithm - Noise, Contrast and Spatial Resolution Properties of CT Images Reconstructed at Different Blending Levels
SN - 978-989-758-216-5
AU - Barca P.
AU - Giannelli M.
AU - Fantacci M.
AU - Caramella D.
PY - 2017
SP - 200
EP - 206
DO - 10.5220/0006240802000206