Resolution-aware Slicing of CAD Data for 3D

Isidore Onyeako, Won-sook Lee

2016

Abstract

Low resolution printing results in fused joints when the joint clearance is intended to be very small. Various 3D printers are capable of print resolutions of up to 600dpi (dots per inch) as quoted in their datasheets. It is imperative to include the ability of a 3D slicing application, to validate 3D models, based on the ability of the printer to properly produce the features with the smallest detail in a model. A way to perform this validation would be the physical measurement of printed parts and comparison to expected results. Our method uses ray casting to detect features in the 3D models whose sizes are below the minimum allowed by the printer resolution. Our model was tested using few simple and complex 3D models. Areas in the slices with thickness less than the specified resolution were detected. Our model serves two purposes: (a) to assist CAD model designers in developing models whose printability is assured- by warning or preventing shape operations that will lead to regions/features with sizes lower than that of the printer resolution; (b) to validate slicing outputs to identify regions/features with sizes lower than the printer resolution. This makes our model very powerful in the quality assurance of 3D printing and a huge cost/time saver when planning for 3D printing.

References

  1. Munir, E., 2013. Slicing 3D CAD Model in STL Format and Laser Path Generation. International Journal of Innovation, Management and Technology, Vol. 4, No. 4, Aug 2013,410-413.
  2. Stamos, I., Allen, P., 3-D Model Construction Using Range and Image Data. In Proceedings of the Conference on Computer Vision and Pattern Recognition (CVPR 7800), USA, June 2000.
  3. ISO 10303-21:2002 Industrial automation systems and integration -- Product data representation and exchange -- Part 21: Implementation methods: Clear text encoding of the exchange structure.
  4. Grimm, T., 2004. User's Guide to Rapid Prototyping, Society of Manufacturing Engineers, p. 55, ISBN 0-87263-697-6.
  5. Topcu, O., Tascioglu, Y., & Unver, H. O. 2011. A Method for Slicing CAD Models in Binary STL Format. 6th International Advanced Technologies Symposium (IATS'11),May 2011, 163, 141-145.
  6. Baumann, F., Buddayci, H., Grunert, J., Keller, F., Roller D., 2015. Influence of slicing tools on quality of 3D printed parts, Computer-Aided Design and Applications, August 2015.
  7. Freedman, David, H. 2013. Layer By Layer. Technology Review 115.1: 50-53. Academic Search Premier. Web. 26 July 2013.
  8. Dolenc, A. and Makela, I. 1994. Slicing procedure for layered manufacturing techniques, Computer Aided Design, Vol. 1 No. 2, pp. 4-12.
  9. Sabourin, E., Houser, S.A. and Bohn, J.H. 1996. Adaptive slicing using stepwise uniform refinement, Rapid Prototyping Journal, Vol. 2 No. 4, pp. 20-6.
  10. Tyberg, J. and Bohn, J.H. 1998. Local adaptive slicing, Rapid Prototyping Journal, Vol. 4 No. 3, pp. 118-27.
  11. Sabourin, E., Houser, S.A. and Bohn, J.H. 1997. Accurate exterior, fast interior layered manufacturing, Rapid Prototyping Journal, Vol. 3 No. 2, pp. 44-52.
  12. Tata, K., Fadel, G., Bagchi, A. and Aziz, N. 1998. Efficient slicing for layered manufacturing, Rapid Prototyping Journal, Vol. 4 No. 4, pp. 151-67.
  13. Cormier, D., Unnanon, K. and Sanni, E. 2000. Specifying non-uniform cusp heights as a potential for adaptive slicing, Rapid Prototyping Journal, Vol. 6 No. 3, pp. 204-11.
  14. Pandey, P.M., Reddy, N.V. and Dhande, S.G. 2003. Improvement of surface finish by staircase machining in fused deposition modelling, Journal of Material Processing Technology, Vol. 132 No. 1, pp. 323-31.
  15. Pulak M. P, Venkata N. R, Sanjay G. D. Slicing Procedures in Layered Manufacturing: a review, Rapid Protoyping Journal, Vol. 9 No.5, June 2003, pp.274- 288.
Download


Paper Citation


in Harvard Style

Onyeako I. and Lee W. (2016). Resolution-aware Slicing of CAD Data for 3D . In Proceedings of the 11th Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 1: GRAPP, (VISIGRAPP 2016) ISBN 978-989-758-175-5, pages 124-129. DOI: 10.5220/0005784701220127


in Bibtex Style

@conference{grapp16,
author={Isidore Onyeako and Won-sook Lee},
title={Resolution-aware Slicing of CAD Data for 3D},
booktitle={Proceedings of the 11th Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 1: GRAPP, (VISIGRAPP 2016)},
year={2016},
pages={124-129},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0005784701220127},
isbn={978-989-758-175-5},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 11th Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications - Volume 1: GRAPP, (VISIGRAPP 2016)
TI - Resolution-aware Slicing of CAD Data for 3D
SN - 978-989-758-175-5
AU - Onyeako I.
AU - Lee W.
PY - 2016
SP - 124
EP - 129
DO - 10.5220/0005784701220127