FAULT DETECTION AND DIAGNOSIS IN A HEAT EXCHANGER

Juan C. Tudon Martinez, Ruben Morales-Menendez, Luis E. Garza Castañón

2009

Abstract

A comparison between the Dynamic Principal Component Analysis (DPCA) method and a bank of Diagnostic Observers (DO) under the same experimental data from a shell and tube industrial heat exchanger is presented. The comparative analysis shows the performance of both methods when sensors and/or actuators fail. Different metrics are discussed (i.e. robustness, quick detection, isolability capacity, explanation facility, false alarm rates and multiple faults identifiability). DO showed quicker detection for sensor and actuator faults with lower false alarm rate. Also, DO can isolate multiple faults. DPCA required a minor training effort; however, it cannot identify two or more sequential faults.

References

  1. Aitouche, A., Maquin, D., and Busson, F. (1998). Multiple Sensor Fault Detection in Heat Exchanger Systems . In Proc. of Int. Conf. on Ctrl. Appl., pages 741-745, Trieste, Italy.
  2. Ballé, P., Fischer, M., Füssel, D., and Isermann, R. (1997). Integrated Control, Diagnosis and Reconfiguration of a Heat Exchanger . In American Control Conference, pages 922-926, Albuquerque, New Mexico.
  3. Caccavale, F. and Villani, L. (2004). An Adaptive Observer for Fault Diagnosis Nonlinear Discrete-Time Systems. In American Control Conference, pages 2463-2468, Boston, Massachusetts.
  4. Detroja, K., Gudi, R., and Patwardhan, S. (2005). Plantwide Detection and Diagnosis using Correspondece Analysis. Control Engineering Practice.
  5. Hotelling, H. (1993). Analysis of a Complex of Statistical Variables into Principal Components. J. Educ. Psychol., 24.
  6. Isermann, R. (2006). Fault-Diagnosis Systems. Springer, Germany, 1st edition.
  7. Jackson, J. and Mudholkar, G. (1979). Control procedures for residuals associated with principal component analysis. Technometrics, 21:341-349.
  8. Krishnan, R. and Pappa, N. (2005). Real Time Fault Diagnosis for a Heat Exchanger A Model Based Approach. In IEEE Indicon Conference, pages 78-82, Chennai, India.
  9. Ku, W., Storer, R., and Georgakis, C. (1995). Disturbance Detection and Isolation by Dinamic Principal Components Analysis. Chemometrics and Intelligent. Lab. Syst., 30:179-196.
  10. Miller, P., Swanson, R., and Heckler, C. (1998). Contribution Plots: A Missing Link in Multivariate Quality Control. Appl. Math. and Comp. Sci., 4(8):775-792.
  11. Mina, J. and Verde, C. (2007). Fault Detection for MIMO Systems Integrating Multivariate Statistical Analysis and Identification Methods . In American Control Conference, pages 3234-3239, New York City, USA.
  12. Morales-Menendez, R., Freitas, N. D., and Poole, D. (2003). State Estimation and Control of Industrial Processes using Particles Filters. In American Control Conference, pages 579-584, Denver, Colorado, USA.
  13. Simmani, S. and Patton, R. (2008). Fault Diagnosis of an Industrial Gas Turbine prototype Using a System Identification Approach. Ctrl. Eng. Prac., (16):769-786.
  14. Verde, C. (2001). Multi-leak Detection and Isolation in Fluid Pipelines . Control Eng. Practice, 9:673-682.
Download


Paper Citation


in Harvard Style

C. Tudon Martinez J., Morales-Menendez R. and E. Garza Castañón L. (2009). FAULT DETECTION AND DIAGNOSIS IN A HEAT EXCHANGER . In Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 978-989-8111-99-9, pages 265-270. DOI: 10.5220/0002216402650270


in Bibtex Style

@conference{icinco09,
author={Juan C. Tudon Martinez and Ruben Morales-Menendez and Luis E. Garza Castañón},
title={FAULT DETECTION AND DIAGNOSIS IN A HEAT EXCHANGER},
booktitle={Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2009},
pages={265-270},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002216402650270},
isbn={978-989-8111-99-9},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - FAULT DETECTION AND DIAGNOSIS IN A HEAT EXCHANGER
SN - 978-989-8111-99-9
AU - C. Tudon Martinez J.
AU - Morales-Menendez R.
AU - E. Garza Castañón L.
PY - 2009
SP - 265
EP - 270
DO - 10.5220/0002216402650270