IMPLEMENTATION OF A DEVICE COMPATIBLE WITH DIFFERENT FIELDBUSES USING RECONFIGURABLE CIRCUITS

Miguel Ángel Domínguez, Mª Dolores Valdés, Mª José Moure

2004

Abstract

Fieldbuses are serial communication networks very used in industrial control applications. They constitute the lower level of the communication networks in a flexible manufacturing system. Nowadays there are a lack of standardization in the area of fieldbuses and it supposes the existence of a lot of proprietary protocols. Thus, the interconnection of equipment from different manufacturers has become very problematic. It implies that a change in equipment supposes a change in the fieldbus too with the consequent economic losses. This paper proposes the implementation of a device using reconfigurable circuits such as FPGAs (Field Programmable Gate Arrays) that can be used as a communication processor, compatible with different fieldbuses making only little changes in the programming code and in the level and impedance matching circuit (depending on the electrical features of the corresponding fieldbus). Thus, the same hardware can be connected to different fieldbuses. The implementation of fieldbus communication processors using FPGAs implies that the interface can be easily adapted to different protocols (improvement in the interconnection between products of different manufacturers) and that the programming code can be easily modified, adding new functionality when it is necessary.

References

  1. AFNOR, 1990. Standard NFC 46-601 to 605: Bus FIP pour échange d'information entre transmetteur, actionneur et automate.
  2. CENELEC, 1996 (December). Standard EN 50170: General purpose field communication system.
  3. Domínguez, M.A., 2000. Contribution to the analysis of the data link level in communication protocols for standard fieldbuses (In Spanish), Ph.D. Thesis, Department of Electronic Technology, University of Vigo, Spain.
  4. IEC, 1993. Standard IEC 1158: Fieldbus standard for use in industrial control system.
  5. IEEE, 1994 (June). IEEE 1076-1993: IEEE Standard VHDL Language Reference Manual, SH16840.
  6. Lías, G., Valdés, M.D., Domínguez, M.A. and Moure, M.J., 2000. Implementing a fieldbus interface using a FPGA. In FPL'2000 10th International Conference on Field Programmable Logic and Applications. Villach, Austria, August 2000, Lecture Notes in Computer Science 1896, R.W. Hartenstein, and H. Grünbacher (Eds.), ISBN 3-540-67899-9, Springer-Verlag, pp. 175-180.
  7. PROFIBUS Nutzeorganisation, 1991 (April). Profibus standard: Translation of the German standard DIN 19245 (part 1 and part 2), PROFIBUS Nutzeorganisation e.V. Wesseling Germany.
  8. ALTERA, 1998. ALTERA Data Book, Altera Corporation, San José (CA).
  9. ALTERA, 1994 (July). MAX+PlusII Getting Started, Altera Corporation.
Download


Paper Citation


in Harvard Style

Domínguez M., Valdés M. and Moure M. (2004). IMPLEMENTATION OF A DEVICE COMPATIBLE WITH DIFFERENT FIELDBUSES USING RECONFIGURABLE CIRCUITS . In Proceedings of the First International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 972-8865-12-0, pages 46-53. DOI: 10.5220/0001132400460053


in Bibtex Style

@conference{icinco04,
author={Miguel Ángel Domínguez and Mª Dolores Valdés and Mª José Moure},
title={IMPLEMENTATION OF A DEVICE COMPATIBLE WITH DIFFERENT FIELDBUSES USING RECONFIGURABLE CIRCUITS},
booktitle={Proceedings of the First International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2004},
pages={46-53},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001132400460053},
isbn={972-8865-12-0},
}


in EndNote Style

TY - CONF
JO - Proceedings of the First International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - IMPLEMENTATION OF A DEVICE COMPATIBLE WITH DIFFERENT FIELDBUSES USING RECONFIGURABLE CIRCUITS
SN - 972-8865-12-0
AU - Domínguez M.
AU - Valdés M.
AU - Moure M.
PY - 2004
SP - 46
EP - 53
DO - 10.5220/0001132400460053