An Investigation on Punching Process of Circular Hole on Commercially Pure Titanium Sheet

Yani Kurniawan, Muslim Mahardika, Suyitno, Muhammad Yaser

2018

Abstract

In this study, an experimental study was carried out to the investigation on punching process of the circular hole on commercially pure titanium sheet by a hydraulic punch machine. Sheared face geometry and hardness distribution resulted from punching process were investigated. The commercially pure titanium sheet with 0.4, 0.5 and 0.6 mm thickness were used in the experiment. The diameter of the punch is 1.7 mm and clearance of punch-die is 7.5%. In the experiment, punch speeds used were 1 and 6.5 mm/s. The results show that punching process on the CP-Ti sheet can increase surface hardness, however hardness distribution on the punched hole are uneven. Hardness distribution on punched hole shows as getting closer with a sheared edge, the surface hardness is bigger. Punch velocity and material thickness increases, burnish height increases, while fracture height decreases.

Download


Paper Citation


in Harvard Style

Kurniawan Y., Mahardika M., Suyitno. and Yaser M. (2018). An Investigation on Punching Process of Circular Hole on Commercially Pure Titanium Sheet.In Proceedings of the 7th Engineering International Conference on Education, Concept and Application on Green Technology - Volume 1: EIC, ISBN 978-989-758-411-4, pages 67-71. DOI: 10.5220/0009006500670071


in Bibtex Style

@conference{eic18,
author={Yani Kurniawan and Muslim Mahardika and Suyitno and Muhammad Yaser},
title={An Investigation on Punching Process of Circular Hole on Commercially Pure Titanium Sheet},
booktitle={Proceedings of the 7th Engineering International Conference on Education, Concept and Application on Green Technology - Volume 1: EIC,},
year={2018},
pages={67-71},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0009006500670071},
isbn={978-989-758-411-4},
}


in EndNote Style

TY - CONF

JO - Proceedings of the 7th Engineering International Conference on Education, Concept and Application on Green Technology - Volume 1: EIC,
TI - An Investigation on Punching Process of Circular Hole on Commercially Pure Titanium Sheet
SN - 978-989-758-411-4
AU - Kurniawan Y.
AU - Mahardika M.
AU - Suyitno.
AU - Yaser M.
PY - 2018
SP - 67
EP - 71
DO - 10.5220/0009006500670071