Functional Evaluation of the Solid Model Creation using 3D Direct Drawing System

Kaoru Mitsuhashi, Hiroshi Hashimoto, Yasuhiro Ohyama

Abstract

3D model of computer is usually created using 3D CAD software, but 3D direct drawing method is still developing the research. In this paper, we suggest and construct the 3D direct drawing system with ARToolKit and develop the required creating methods and tools. The method is the creating solid algorithm using projective methods. The algorithm is the converting multiple surfaces into a solid. After that, the functionality of the methods and tools are evaluated using the Taguchi method (quality engineering). In addition, we investigate the optimal condition of the creating methods and tools required for modeling.

References

  1. Daniel F. Keefe, Robert C. Zeleznik, and David H. Laidlaw, Drawing on Air: Input Techniques for Controlled 3D Line Illustration, IEEE Transactions on Visualization and Computer Graphics, Vol. 13, No. 5, 2007
  2. Yonghua Chen, Zhengyi Yang, and Lili Lian, On the Development of a Haptic System for Rapid Product Development, Computer-Aided Design, Vol.37, No.5, pp. 559-569, 2005
  3. Ali Akgunduz and Hang Yu, Two-Step 3-Dimensional Sketching Tool for New Product Development, Proceedings of the 2004 Winter Simulation Conference, pp.1728-1733, 2004
  4. Gerold Wesche, and Hans-Peter Seidel, FreeDrawer - A Free-Form Sketching System on the Responsive Workbench, VRST'01, November, pp. 15-17, 2001
  5. F. Bruno, M. L. Luchi, M. Muzzupappa, and S. Rizzuti, A Virtual Reality Desktop ConFigureuration for Freeform Surface Sketching, In Proceedings of XIV Congreso Internacional de Ingeniería Gráfica, ed. F. F. Salazar and A. A. Badiola de Miguel, Santander, Spain, 2002
  6. Adrian David Cheok, Neo Weng Chuen Edmund, and Ang Wee Eng, Inexpensive Non-Sensor Based Augmented Reality Modeling of Curves and Surfaces in Physical Space, Proceedings of the International Symposium on Mixed and Augmented Reality (ISMAR'02) ISMAR 2002, 2002
  7. Ranjit Roy, A Primer on the Taguchi Method, Society of Manufacturing Engineers, 1990
  8. Y. Yokoyama, Quality Engineering Lecture 4: Experimental Design for Quality Designs, Japanese Standards Association, 1988
  9. Kaoru MITSUHASHI, Functional Evaluation of the Curved Surface Created by 3D Direct Drawing, The 2nd IFToMM (International Federation for the Promotion of Mechanism and Machine Science) Asian Conference on Mechanism and Machine Science 2012, November7-10,Tokyo,Japan, 2012.
  10. Kaoru MITSUHASHI, Ikuo YOSHIDA, Jin-Hua SHE, Yasuhiro OHYAMA, “Suggestion of 3D Direct Drawing Method by Microsoft Kinect”, 15th International Conference on Precision Engineering (ICPE2014), July23-25, Kanazawa, Japan, 2014
  11. Ignacio Llamas, ByungMoon Kim, Joshua Gargus, Jarek Rossignac, and Christopher D. Shaw: Twister: a spacewarp operator for the two-handed editing of 3D shapes. ACM Trans. Graph. 22(3), 2003, pp.663-668
Download


Paper Citation


in Harvard Style

Mitsuhashi K., Hashimoto H. and Ohyama Y. (2016). Functional Evaluation of the Solid Model Creation using 3D Direct Drawing System . In Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO, ISBN 978-989-758-198-4, pages 513-521. DOI: 10.5220/0006007005130521


in Bibtex Style

@conference{icinco16,
author={Kaoru Mitsuhashi and Hiroshi Hashimoto and Yasuhiro Ohyama},
title={Functional Evaluation of the Solid Model Creation using 3D Direct Drawing System},
booktitle={Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,},
year={2016},
pages={513-521},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0006007005130521},
isbn={978-989-758-198-4},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 13th International Conference on Informatics in Control, Automation and Robotics - Volume 2: ICINCO,
TI - Functional Evaluation of the Solid Model Creation using 3D Direct Drawing System
SN - 978-989-758-198-4
AU - Mitsuhashi K.
AU - Hashimoto H.
AU - Ohyama Y.
PY - 2016
SP - 513
EP - 521
DO - 10.5220/0006007005130521