Cause Analysis and Treatment of Abnormal Shear in Head Cutting Flying Shear of Hot Rolling

Xiaoyan Chen

2015

Abstract

Precise shearing of flying shear plays a very important role in cost control of a hot-roll line. The malfunction of sensors which help to locate where to cut accurately makes it difficult to achieve this goal. This paper discussed in detail three key control processes in completing precise shearing. Possible causes of abnormal shear in production practice were analyzed, based on which the optimal signal switching control measures was put forwards. A monitoring system watchdoged the signals from sensor. If sampling showed that malfunction happened, a backup signal was used. Also the possible backup signals were discussed how to replace the breakdown devices. In practice, these measures obtain a good application effect in precise shearing. Mistakes in cutting are reduced to minimum.

References

  1. OUYANG Xiang-xin, Principle And Operation Of The Auto-Control System For Flying Shears, SOUTHERN METALS,(134), pp. 30-33, 2003.
  2. Masahiro Kayama etc, Advanced plant maintenance and control system.7th.Conf.On steel roiling, Cln'ba, Japan, pp.20-23, 1998.
  3. Jiro Jumayama etc: Information and control system technology for iron and steel plants . Hitachi Review,Japan, pp.18-23, 1996.
Download


Paper Citation


in Harvard Style

Chen X. (2015). Cause Analysis and Treatment of Abnormal Shear in Head Cutting Flying Shear of Hot Rolling . In Proceedings of the Information Science and Management Engineering III - Volume 1: ISME, ISBN 978-989-758-163-2, pages 393-396. DOI: 10.5220/0006027103930396


in Bibtex Style

@conference{isme15,
author={Xiaoyan Chen},
title={Cause Analysis and Treatment of Abnormal Shear in Head Cutting Flying Shear of Hot Rolling},
booktitle={Proceedings of the Information Science and Management Engineering III - Volume 1: ISME,},
year={2015},
pages={393-396},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0006027103930396},
isbn={978-989-758-163-2},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Information Science and Management Engineering III - Volume 1: ISME,
TI - Cause Analysis and Treatment of Abnormal Shear in Head Cutting Flying Shear of Hot Rolling
SN - 978-989-758-163-2
AU - Chen X.
PY - 2015
SP - 393
EP - 396
DO - 10.5220/0006027103930396