THE FINS PROTOCOL FOR COMPLEX INDUSTRIAL APPLICATTIONS - A Case Study

Júlio Costa, Nuno Carvalho, Filomena Soares, José Machado

2009

Abstract

This paper presents a comparative approach on the use of different industrial networks configurations and industrial communication protocols. Some aspects, that may influence the right choice of the most indicated protocol for each industrial network configuration, are discussed. It is presented a case study and two configurations networks implementing two industrial communication protocols. The respective advantages and disadvantages are presented. All the detailed aspects including the data exchange are presented too. The obtained results are extrapolated for other similar industrial applications.

References

  1. IEC 61784-2: Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for realtime networks based on ISO/IEC 8802-3, available at www.iec.ch
  2. ISA-dS95.01-1999, Draft Standard, Enterprise - Control System Integration, Part 1: Models and Terminology, November, available at 1999www.mel.nist.gov/sc5wg1/isa95part1-d14.pdf)
  3. Pires, P. S. M. and Oliveira, L. A. H. G., 2006, Security aspects of SCADA and corporate network interconnection: An overview, Proceedings of the International Conference on Dependability of Computer Systems (DEPCOS-RELCOMEX'06), pages 127-134, May.
  4. IEEE 802.1AB-2005 - IEEE Standard for Local and metropolitan area networks Station and Media Access Control Connectivity Discovery; available at www.ieee.org
  5. Felser, M., 2005, Real-time Ethernet - industry prospective, Proceedings of the IEEE, Volume 93, Issue 6, June Page(s): 1118 - 1129
  6. PROFIBUS International: PROFINET: Technology and Application, System Description, Document number: 4.132, Issue April 2006, available at www.profibus.com
  7. Liu, J., Fang, Y., Zhang, D., 2007, PROFIBUS-DP and HART Protocol Conversion and the Gateway Development, Second IEEE Conference on Industrial Electronics and Applications
  8. Lee, K., 2001, Sensor Networking and Interface Standardization, IEEE Instrumentation and Measurement Technology Conference, Budapest, Hungary, May 21-23.
  9. Kizza, J.M., 2005, Security Threats to Computer Networks, Computer Communications and Networks Part II, Springer.
  10. Spratt, Michael P.; Albrecht, Alan; Curcio, Joe; Dove, Dan; Goody, Steve, 1994, An Overview of IEEE 802.12 Demand Priority, HP Labs Technical Reports, available at
  11. http://www.hpl.hp.com/techreports/94/HPL-94-17.html
Download


Paper Citation


in Harvard Style

Costa J., Carvalho N., Soares F. and Machado J. (2009). THE FINS PROTOCOL FOR COMPLEX INDUSTRIAL APPLICATTIONS - A Case Study . In Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-989-674-000-9, pages 348-354. DOI: 10.5220/0002249603480354


in Bibtex Style

@conference{icinco09,
author={Júlio Costa and Nuno Carvalho and Filomena Soares and José Machado},
title={THE FINS PROTOCOL FOR COMPLEX INDUSTRIAL APPLICATTIONS - A Case Study},
booktitle={Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2009},
pages={348-354},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002249603480354},
isbn={978-989-674-000-9},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 6th International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - THE FINS PROTOCOL FOR COMPLEX INDUSTRIAL APPLICATTIONS - A Case Study
SN - 978-989-674-000-9
AU - Costa J.
AU - Carvalho N.
AU - Soares F.
AU - Machado J.
PY - 2009
SP - 348
EP - 354
DO - 10.5220/0002249603480354