OOPUS - A Production Planning Information System to Assure High Delivery Reliability Under Short-term Demand Changes and Production Disturbances

Wilhelm Dangelmaier, Tobias Rust, Thomas Hermanowski, Daniel Brüggemann, Daniel Kaschula, Andre Döring, Thorsten Timm

2007

Abstract

Batch-sizing and scheduling is the central decision problem in the area of production planning. A special challenge in this context is to handle the big amount of data in an adequate time interval. To aggregate and to illustrate this data clearly, appropriate techniques are required. This paper presents a new approach to integrate a Production Planning Table visualized by a Gantt chart and a cumulative quantity table for maximum information transparency in production planning. The discussed solution is realized in OOPUS, an object-oriented tool for planning and control, which became the leading production planning system in two motor assembly plants of an international automobile manufacturer.

References

  1. Harjes, I.-M.; Bade, B.; Harzer, F., 2004. Anlaufmanagement - Das Spannungsfeld im Produktentstehungsprozess. In: Industrie Management.
  2. Holland, C., Light, B, 1999. A critical success factors model for ERP implementation. In: IEEE Software, vol. 16, no. 3.
  3. Tempelmeier, H., 2006. Inventory Management in Supply Networks. Problems, Models, Solutions. Books on Demand GmbH, Norderstedt.
  4. Stammen-Hegener, C., 2002. Simultane Losgrößen- und Reihenfolgeplanung bei ein- und mehrstufiger Fertigung. Dt. Univ.-Verl., Wiesbaden.
  5. Katok, E.; Lewis, H. S.; Harrison, T. P., 1998. Lot sizing in general assembly systems with setup costs, setup times, and multiple constrained resources. Management Science, no. 44.
  6. Tempelmeier, H., 2003. Material-Logistik. Springer, Berlin, 5th edition.
  7. Maes, J., McClain, O.J., Van Wassenhove, L.N., 1991. Multilevel capacitated lotsizing complexity and LPbased heuristics. European Journal of Operational Research, no. 53.
  8. Wilson, James M., 2003. Gantt Charts: A Centenary Appreciation. European Journal of Operational Research 149, no. 2.
  9. Schönsleben, P., 2004. Integrales Logistikmanagement - Planung und Steuerung der umfassenden Supply Chain. Springer, Berlin, 4th edition.
  10. Kurbel, K., 2005. Produktionsplanung und -steuerung im Enterprise Resource Planning und Supply Chain Management. Oldenbourg Wissenschaftsverlag, München.
  11. Dangelmaier, W.; Henkel, S.; Holtkamp, R., 1997. OOPUS - eine objektorientierte PPS-Plattform. In: wt - Produktion und Management.
  12. Dangelmaier, W.; Brockmann, K.; Hamady, M.; Holtkamp, R.; Langemann, T., 1999. OOPUS-PSCM - Ein Werkzeug zum Produktions- und Supply-ChainManagement. In: Logistik Management: Intelligente I + K Technologien. Springer, Berlin.
  13. Dangelmaier, W.; Holtkamp, R.; Hamady, M.; Langemann, T.; Krebs, W., 1999. Produktions- und Supply-Chain-Management bei größeren Stückzahlen. In: PPS-Management.
  14. Dangelmaier, W., Klöpper, B., Timm, T. Brüggemann, D.; A Modelling Approach for Dynamic and Complex Capacities in Production Control Systems, BIS 2007, Lecture Notes of Computer Science 4439, pp. 626- 637, Springer Verlag, Berlin Heidelberg
Download


Paper Citation


in Harvard Style

Dangelmaier W., Rust T., Hermanowski T., Brüggemann D., Kaschula D., Döring A. and Timm T. (2007). OOPUS - A Production Planning Information System to Assure High Delivery Reliability Under Short-term Demand Changes and Production Disturbances . In Proceedings of the Ninth International Conference on Enterprise Information Systems - Volume 1: ICEIS, ISBN 978-972-8865-88-7, pages 423-430. DOI: 10.5220/0002384504230430


in Bibtex Style

@conference{iceis07,
author={Wilhelm Dangelmaier and Tobias Rust and Thomas Hermanowski and Daniel Brüggemann and Daniel Kaschula and Andre Döring and Thorsten Timm},
title={OOPUS - A Production Planning Information System to Assure High Delivery Reliability Under Short-term Demand Changes and Production Disturbances},
booktitle={Proceedings of the Ninth International Conference on Enterprise Information Systems - Volume 1: ICEIS,},
year={2007},
pages={423-430},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002384504230430},
isbn={978-972-8865-88-7},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Ninth International Conference on Enterprise Information Systems - Volume 1: ICEIS,
TI - OOPUS - A Production Planning Information System to Assure High Delivery Reliability Under Short-term Demand Changes and Production Disturbances
SN - 978-972-8865-88-7
AU - Dangelmaier W.
AU - Rust T.
AU - Hermanowski T.
AU - Brüggemann D.
AU - Kaschula D.
AU - Döring A.
AU - Timm T.
PY - 2007
SP - 423
EP - 430
DO - 10.5220/0002384504230430