An ADAS Design based on IoT V2X Communications to Improve Safety - Case Study and IoT Architecture Reference Model

Yakusheva Nadezda, Gian Luca Foresti, Christian Micheloni

Abstract

Several technologies are used today to improve safety in transportation systems. The development of a system for drivability based on both V2V and V2I communication is considered an important task for the future. V2X communication will be a next step for the transportation safety in the nearest time. A lot of different structures, architectures and communication technologies for V2I based systems are under development. Recently a global paradigm shift known as the Internet-of-Things (IoT) appeared and its integration with V2I communication could increase the safety of future transportation systems. This paper brushes up on the state-of-the-art of systems based on V2X communications and proposes an approach for system architecture design of a safe intelligent driver assistant system using IoT communication. In particular, the paper presents the design process of the system architecture using IDEF modeling methodology and data flows investigations. The proposed approach shows the system design based on IoT architecture reference model.

References

  1. Abdeldime M, Abdelgader, S, Lenan, W 2014 'The Physical Layer of the IEEE 802.11p WAVE Communication Standard: The Specifications and Challenges”, in WCECS 2014, San Francisco, USA.
  2. Al-Fuqaha, A, Guizani, M, Mohammadi, M, Aledhari, M, Ayyash, M 2015, 'Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications', IEEE Communication Surveys & Tutorials, vol. 17, no. 4.
  3. Bassi, A, Bauer, M, Fiedler, M, Kramp, T, Van Kranenburg, R, Lange, S, Meissner, S 2013, Enabling things to talk: Designing IoT solutions with the IoT architectural reference model, Berlin, Heidelberg: Springer International Publishing.
  4. Cheng, C, Zongxin, W 2013 'Design of a System for Safe Driving based on the Internet of Vehicles and the Fusion of Multi-aspects Information', in 9th International Conference on Computational Intelligence and Security', Chengdu, China.
  5. European Telecommunications Standards Institute (ETSI) 2010, Intelligent Transport Systems (ITS); Communications Architecture (EN 302 665 V1.1.1.), ETSI standard, Sophia-Antipolis, France.
  6. European Parliament 'Directive 2010/40/EU of the European Parliament and of the Council on the framework for the deployment of Intelligent Transport Systems in the field of road transport and for interfaces with other modes of transport', 2010, Official Journal of the European Union, viewed 2 December, 2016, <http://eurlex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:20 10:207:0001:0013:EN:PDF>
  7. ERTICO-ITS Europe Partnership, 2016, ERTICO-ITS Europe Partnership, Brussels, viewed 3 December 2016, <http://ertico.com/>
  8. Herrera-Quintero, LF, et al. 2015, 'IoT approach applied in the context of ITS: Monitoring Highways through Instant Messaging', in 14th International Conference on ITS Telecommunications, Copenhagen, Denmark.
  9. Internet Engineering Task Force (IETF) 2014, Constrained Application Protocol (CoAP) (RFC 7252), IETF proposed standard, Fremont, California, USA.
  10. Internet Engineering Task Force (IETF) 2015, Hypertext Transfer Protocol Version 2 (HTTP/2) (RFC 7540), IETF proposed standard, Fremont, California, USA.
  11. Institute of Electrical and Electronics Engineers (IEEE) 2011, Standard for Local and metropolitan area networks-Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) (IEEE 802.15.4), IEEE Standard, Piscataway, New Jersey, USA.
  12. Institute of Electrical and Electronics Engineers (IEEE) 2016, Standard for Wireless Access in Vehicular Environments (WAVE) - Identifier Allocations (IEEE 1609.12-2016), IEEE Standard, Piscataway, New Jersey, USA.
  13. Institute of Electrical and Electronics Engineers (IEEE) 2013, IEEE Guide Wireless Access in Vehicle Environments (WAVE) - Architecture (IEEE 1609.0- 2013), IEEE Standard, Piscataway, New Jersey, USA.
  14. Lussereau, J, Stein, P, David, JA, Rummelhard, L, Negre, A, Laugier, C, Vignard, N, Othmezouri, G 2015, 'Integration of ADAS algorithm into an Experimental Vehicle', in 2015 IEEE International Workshop on Advanced Robotics and its Social Impacts (ARSO), Lyon, France.
  15. Mostafa, A, Vegni, AM, Singoria, R, Oliveira, T, Little, T and Agrawal, DP 2011 'A V2X-based approach for reduction of delay propagation in Vehicular Ad-Hoc Networks', MCL Technical Report no. 07-18-2011.
  16. Network of National ITS Associations, 2016, Introducing the Network of National Associations, viewed 3 December 2016, <http://itsnetwork.org/>
  17. Organization for the Advancement of Structured Information Standards (OASIS) 2014, Message Queuing Telemetry Transport (MQTT) TC version 3.1.1., OASIS Standard, Burlington, USA.
  18. Papadimitratos, P, La Fortelle, A, Evenssen, K, Brignolo, R, Cosenza, S 2009, 'Vehicular Communication Systems: Enabling Technologies, Applications, and Future Outlook on Intelligent Transportation', IEEE Commun. Mag., vol. 47, no.11, pp. 84-95.
  19. Stübing, H, Bechler, M, Heussner, D, May, T, Radusch, I, Rechner, H, Vogel, P 2010 'SimTD: A Car-to-X System Architecture for Field Operational Tests', IEEE Commun. Mag., vol. 48, no.5, pp. 148-154.
  20. Vasseur, JP 2014 'The Internet of Things: an Architectural Foundation and its Protocols', in Cisco Live Event, Milan.
  21. van Ratingen, M, Fildes, B, Lie, A, Keall, M, Tingvall, C 2015, 'Validating Vehicle Safety using Meta-analysis: a new Approach to Evaluating new Vehicle Safety Technologies', in 24th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Gothenburg, Sweden.
  22. Wieker, H et al., 2009 'Management of Roadside Units for the SIM-TD Field Test (Germany)78, in 16th World Congress Exhibition ITS Services, Stockholm, Sweden.
  23. Zhang, H, He, L 2015 'Modeling and Topological Properties of a V2I Sub Network', Bulgarian Academy of Sciences, Cybernetics and information technologies, vol. 15, no 4, Sofia.
Download


Paper Citation


in Harvard Style

Nadezda Y., Foresti G. and Micheloni C. (2017). An ADAS Design based on IoT V2X Communications to Improve Safety - Case Study and IoT Architecture Reference Model . In Proceedings of the 3rd International Conference on Vehicle Technology and Intelligent Transport Systems - Volume 1: VEHITS, ISBN 978-989-758-242-4, pages 352-358. DOI: 10.5220/0006375303520358


in Bibtex Style

@conference{vehits17,
author={Yakusheva Nadezda and Gian Luca Foresti and Christian Micheloni},
title={An ADAS Design based on IoT V2X Communications to Improve Safety - Case Study and IoT Architecture Reference Model},
booktitle={Proceedings of the 3rd International Conference on Vehicle Technology and Intelligent Transport Systems - Volume 1: VEHITS,},
year={2017},
pages={352-358},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0006375303520358},
isbn={978-989-758-242-4},
}


in EndNote Style

TY - CONF
JO - Proceedings of the 3rd International Conference on Vehicle Technology and Intelligent Transport Systems - Volume 1: VEHITS,
TI - An ADAS Design based on IoT V2X Communications to Improve Safety - Case Study and IoT Architecture Reference Model
SN - 978-989-758-242-4
AU - Nadezda Y.
AU - Foresti G.
AU - Micheloni C.
PY - 2017
SP - 352
EP - 358
DO - 10.5220/0006375303520358