FORMAL METHOD FOR VALIDATION OF PRODUCT DESIGN THROUGH KNOWLEDGE MODELLING

Stilian Stanev, Jivka Ovtcharova, Waldemar Walla

2009

Abstract

The aim of production-oriented product validation methods is to ensure the consideration of production requirements during the product design phase and to validate the product specification against these requirements before launching further steps. This work focuses on a formal method for product design specification by using techniques from the knowledge modelling and management. The solution developed within the EU project MyCar, in collaboration between the IMI institute of Karlsruhe and the Research and Advanced Technology Group of Daimler AG, is based on the example of the body shop in the automotive industry. A solution based on the Production-oriented Product Validation Platform gathers the relevant production requirements and makes it available in a structured form to assess the product design with respect to its ability to be produced on the production equipment.

References

  1. Weyand, L., Bley, H., Kaiser, J.-M., Meißner, R., Bär, T. 2008. Production Oriented Design-Check in Car Manufacturing - Not Only a Question of Powerful Validation Tools. In: Intelligent Computation in Manufacturing Engineering, 6th Conference, Neapel.
  2. Pahl G, Beitz W, Feldhusen J, Grote K-H (2007): Konstruktionslehre Grundlagen erfolgreicher Entwicklung. Methoden und Anwendungen, Springer Verlag. Berlin Heidelberg New York, 7th Edition.
  3. Müller, M., 2007. Reifegradbasierte Optimierung von Entwicklungsprozessen - am besonderen Beispiel der produktionsbezogenen Produktabsicherung. In: Bley H, Weber C (eds.) Schriftenreihe Produktionstechnik. Saarland University, Saarland.
  4. Svensson, D., Malmström, J., Pikosz, P., Malmqvist, J.: A Framework for Modelling and Analysis of Engineering Information Systems. Proceedings of ASME DETC 7899, 1999. Las Vegas, USA.
  5. Burr, H., Müller, M., Vielhaber, M., 2007. EIMS - A framework for engineering process analysis. In: Proceedings of the International Conference on Engineering Design, ICED 7807, Paris.
  6. Winston, P. H., 1993. Artificial intelligence, AddisonWesley Reading. 1st Edition.
  7. Puppe, F., 1991. Einführung in Expertensysteme, Springer Verlag. Berlin Heidelberg, 1st Edition.
  8. Gottlob, G., Frühwirt, T., Horn, W., 1990. Expertensysteme, Springer Verlag. Wien, 1st Edition.
Download


Paper Citation


in Harvard Style

Stanev S., Ovtcharova J. and Walla W. (2009). FORMAL METHOD FOR VALIDATION OF PRODUCT DESIGN THROUGH KNOWLEDGE MODELLING . In Proceedings of the International Conference on Knowledge Engineering and Ontology Development - Volume 1: KEOD, (IC3K 2009) ISBN 978-989-674-012-2, pages 166-170. DOI: 10.5220/0002293501660170


in Bibtex Style

@conference{keod09,
author={Stilian Stanev and Jivka Ovtcharova and Waldemar Walla},
title={FORMAL METHOD FOR VALIDATION OF PRODUCT DESIGN THROUGH KNOWLEDGE MODELLING},
booktitle={Proceedings of the International Conference on Knowledge Engineering and Ontology Development - Volume 1: KEOD, (IC3K 2009)},
year={2009},
pages={166-170},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0002293501660170},
isbn={978-989-674-012-2},
}


in EndNote Style

TY - CONF
JO - Proceedings of the International Conference on Knowledge Engineering and Ontology Development - Volume 1: KEOD, (IC3K 2009)
TI - FORMAL METHOD FOR VALIDATION OF PRODUCT DESIGN THROUGH KNOWLEDGE MODELLING
SN - 978-989-674-012-2
AU - Stanev S.
AU - Ovtcharova J.
AU - Walla W.
PY - 2009
SP - 166
EP - 170
DO - 10.5220/0002293501660170