SENSOR AND ACTUATOR FAULT ANALYSIS IN ACTIVE SUSPENSION IN VIEW OF FAULT-TOLERANT CONTROL

Claudio Urrea, Marcela Jamett

2008

Abstract

This paper shows the first step of a fault tolerant control system (FTCS) to control active suspension on a full-car suspension model. In this paper, the elimination of the inevitable pitch and roll actions of a spring suspension between each axle and the body of a vehicle is studied. An actuator (linear motor) producing an electromagnetic force and a pneumatic force acting simultaneously on the same output element is used. This linear motor acts as a force generator that compensates instantly for the disturbing effects of the road surface. Simulation results to illustrate the system’s performance in front of the occurrence of sensor and actuator faults are shown.

References

  1. Buckner G., Schuetze K., Beno J.: Active Vehicle Suspension Control Using Intelligent Feedback Linearization. American Control Conference, Chicago, Illinois, USA (2000) 4019-4024
  2. Fukao T., Yamawaki A., Adachi N.: Nonlinear and H8 Control of Active Suspension Systems with Hydraulic Actuators. American Control Conference, Chicago, Illinois, USA (2000) 5125-5128
  3. Giua A., Seatzu C., Usai G.: Active Axletree Suspension for Road Vehicles with Gain-Switching. 39th IEEE Conference on Decision and Control Sydney Convention and Exhibition Centre, Sydney, Australia (2000)
  4. Lefebvre D., Chevrel P.,Richard S.: A Hinfinity-based control design methodology dedicated to active control of vehicle longitudinal oscillations. 40th IEEE Conference on Decision and Control Orlando, Florida, USA (2001) 99-104
  5. Lakehal-Ayat M., Diop S., Fenaux E.: Development of a Full Active Suspension System. 15th Triennial World Congress IFAC, Barcelona, Spain (2002)
  6. Karlsson N., Teely A., Hrovatz D.: A Backstepping Approach to Control of Active Suspensions. 40th IEEE Conference on Decision and Control Orlando, Florida, USA (2001) 4170-175
  7. Alleyne A., Hedrick J.: Nonlinear Adaptive Control of Active Suspensions. IEEE Trans. Control Syst. Technol. 1 (1995) 94-101
  8. Alleyne A., Liu R., Wright H.: On the Limitations of Force Tracking Control for Hydraulic Active Suspensions. American Control Conference, Philadelphia, USA (1998) 43-47
  9. Noura H., Theilliol D., Sauter D.: Actuator Fault-Tolerant Control Design: Demostration on a Three-TankSystem. International Journal of Systems Science series 9 (2000) 1143-1155
  10. Zhang Y., Jiang J.: Design of Restructurable Active Faut-Tolerant Control Systems. 15th Triennial World Congress IFAC, Barcelona, Spain (2002)
  11. Ikenaga S., F. Lewis, Campos J., Davis L.: Active Suspension Control of Ground Vehicle Based on a Full-Vehicle Model. American Control Conference, Chicago, Illinois, USA (2000) 4019-4024
Download


Paper Citation


in Harvard Style

Urrea C. and Jamett M. (2008). SENSOR AND ACTUATOR FAULT ANALYSIS IN ACTIVE SUSPENSION IN VIEW OF FAULT-TOLERANT CONTROL . In Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO, ISBN 978-989-8111-30-2, pages 179-186. DOI: 10.5220/0001490201790186


in Bibtex Style

@conference{icinco08,
author={Claudio Urrea and Marcela Jamett},
title={SENSOR AND ACTUATOR FAULT ANALYSIS IN ACTIVE SUSPENSION IN VIEW OF FAULT-TOLERANT CONTROL},
booktitle={Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,},
year={2008},
pages={179-186},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001490201790186},
isbn={978-989-8111-30-2},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Fifth International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO,
TI - SENSOR AND ACTUATOR FAULT ANALYSIS IN ACTIVE SUSPENSION IN VIEW OF FAULT-TOLERANT CONTROL
SN - 978-989-8111-30-2
AU - Urrea C.
AU - Jamett M.
PY - 2008
SP - 179
EP - 186
DO - 10.5220/0001490201790186