GENERAL ENGINEERING DATA MODEL IN SPECIAL PURPOSE MACHINE ENGINEERING

Zhiliang Qi, Christian Schäfer, Peter Klemm

Abstract

A main problem in todays engineering of special purpose machines is the reuse and the consistency of engineering data across the whole development process. This paper presents an approach how to manage and share data in the entire development process in the field of special purpose machine engineering. The first part gives a short overview of the current problems by using software tools in engineering and the engineering requirements. In the second part the current data models used in special purpose machine engineering are analyzed. The third part provides the General Engineering Data Model (GED) as a new concept to share and reuse the engineering data from each engineering phase and to improve the development activity. At the end this paper gives also an evaluation on benefits and contribution of this GED.

References

  1. Brandl, T. (1999). Anlageninformationssystem - Informationsmodell und Erstellungsystematik. Jost Jetter Verlag, Heimsheim.
  2. Ciocoiu, M., Nau, D. S., and Gruninger, M. (2001). Ontologies for integrating engineering applications. In Transaction of the ASME, Journal of Computing and Information Science in Engineering, volume 1, pages 12-22.
  3. EPLAN (2005). Reibungsloser Informationsfluss zwischen allen Abteilungen bringt Ihr Engineering auf Erfolgsspur. Technical report, EPLAN Software and Service.
  4. Gausemeier, J., Flath, M., and Mohringer, S. (2001). Conceptual design of mechatronic systems supported by semi-formal specification. In Proceedings of the IEEE/ASME international Conference on Advanced Intelligent Mechatronics, pages 888-892, Como, Italy.
  5. Germer, C., Hansen, U., Franke, H.-J., and Büttgenbach, S. (2001). Produkentwicklung mit neuen technologien - mechatronik vs. mikrosystemtechnik. In 4.
  6. Keil, A. and Schmidt, M. (2001). Modellierung und simulation elektromechanischer systeme durch werkzeugkopplung. In 4. VDI Mechatronik Tagung 2001 Innovative Produktentwicklungem, pages 112- 126.
  7. Kübler, R. (2000). Modulare Modellierung und Simulation mechatronischer Systeme. VDI-Verlag Düsseldorf.
  8. Lutz, R. (1999). Softwaretechnik für maschinennahe Steuerungsfunktionen bei Fertigungseinrichtungen. Jost Jetter Verlag, Heimsheim.
  9. Otter, M. (1995). Objektorientierte Modellierung mechatronischer Systeme am Beispiel geregelter Roboter. VDIVerlag, Düsseldorf.
  10. Pelz, G. (2001). Modellierung und Simulation mechatronischer Systems. Hüthig Verlag Heidelberg.
  11. Reif, T. (1998). Zur objektorientierten Modellierung aktiver Mehrkörpersysteme. VDI-Verlag Düsseldorf.
  12. Rembold, U., Nnaji, B. O., and Storr, A. (1994). CIM: Computeranwendung in der Produktion. Addison-Wesley.
  13. Rossmann, J. (1993). Echtzeitfähige, kollisionsvermeidende Bahnplanung für Mehrrobotersysteme. Universität Dortmund.
  14. Schäfer, C. and L ópez, O. (1999). An Object-oriented robot model and its integration into flexible manufacturing system. In I. Imam, Editor, Mulitple Approaches to Inteligent Systems. Springer.
  15. Starke, G. (2001). Virtual reality und simulation als integrierte werkzeuge für die entwicklung mechatronischer systeme. In 4. VDI Mechatronik Tagung 2001 Innovative Produktentwicklungem, pages 1-17.
  16. Tecnomatix (2005). eM-Planner: Planning, Analyzing and Managing Manufacturing Process. Technical report, http://www.tecnomatix.de/.
  17. Uthoff, J. (1998). Offenes, modulares System zur zellenorientierten Robotersimulation. VDI-Verlag Düsseldorf.
  18. VDI (2003). Digitale Planung bringt Sicherheit. Technical report, VDI.
  19. Welp, E. G., Lippold, C., and Bludau, C. (2001). Ein system zur objektorientierten modellierung mechatronischer produktkonzepte (modcode). In 4. VDI Mechatronik Tagung 2001 Innovative Produktentwicklungen, pages 93-112.
  20. Westkämper, E. (2002). Die digitale fabrik - interview mit engelbert westkämper: Intelligente maschinen müssen kommunizieren und sich selbst organisieren. Technical report, Siemens: Pictures of the Future.
Download


Paper Citation


in Harvard Style

Qi Z., Schäfer C. and Klemm P. (2005). GENERAL ENGINEERING DATA MODEL IN SPECIAL PURPOSE MACHINE ENGINEERING . In Proceedings of the Second International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO, ISBN 972-8865-31-7, pages 348-354. DOI: 10.5220/0001170203480354


in Bibtex Style

@conference{icinco05,
author={Zhiliang Qi and Christian Schäfer and Peter Klemm},
title={GENERAL ENGINEERING DATA MODEL IN SPECIAL PURPOSE MACHINE ENGINEERING},
booktitle={Proceedings of the Second International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,},
year={2005},
pages={348-354},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0001170203480354},
isbn={972-8865-31-7},
}


in EndNote Style

TY - CONF
JO - Proceedings of the Second International Conference on Informatics in Control, Automation and Robotics - Volume 3: ICINCO,
TI - GENERAL ENGINEERING DATA MODEL IN SPECIAL PURPOSE MACHINE ENGINEERING
SN - 972-8865-31-7
AU - Qi Z.
AU - Schäfer C.
AU - Klemm P.
PY - 2005
SP - 348
EP - 354
DO - 10.5220/0001170203480354